hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Front Brake Caliper - Rattling Noise|Page 8696 > < Diagram Information and Instructions|Page 8686
Page 1
background image

Brake Caliper: Customer Interest
Front Brake Caliper - Rattling Noise

Group: CHASSIS

Number: 02-50-002

Date: JANUARY, 2002

Model: 1996-2001 ELANTRA / TIBURON

Subject:
1996-2001 ELANTRA/TIBURON FRONT 
BRAKE CALIPER RATTLE NOISE REPAIR KIT

DESCRIPTION:
If a rattling noise is heard from the front brake calipers during braking and/or while driving the vehicle over rough road surfaces, this noise may be
caused by improper clearance between the caliper and guide rod.

To improve this condition, a kit containing guide rods, rubber bushings and special grease has been made available. If this condition is diagnosed, the
guide rods in the front brake calipers should be replaced using the following procedure.

PARTS INFORMATION

REPAIR PROCEDURE:

1.

Hoist the vehicle.

2.

Remove the left front wheel.

Front Brake Caliper - Rattling Noise|Page 8696 > < Diagram Information and Instructions|Page 8686