Tiburon L4-2.0L (1999)
4. Lift up the vehicle and detach the mounting clamp which is holding both of the pressure tube and the return tube.
5. Lift down the vehicle and remove the connector (24mm).
6. Remove the pressure hose and tube assembly.
7. Installation is the reverse order of removal.
NOTE:
-
Install the pressure hose and tube so that they are not twisted and they do not come in contact with any other parts.
-
After installation, bleed the system.
RETURN TUBE AND HOSE
1. Detach the power steering fluid reservoir from its mounting bracket.
2. Remove the engine coolant reservoir.
3. Detach the return tube and hose assembly mounting clamps.
