Tiburon L4-2.0L (1999)
NOTE:
These new bushings may be used to reduce a "squeak" or "squawk" noise in vehicles produced before 11/17/01 (Transmission # 963248) using the
following procedure.
PROCEDURE:
1.
Confirm that the vehicle was produced before 11/17/01.
2.
Confirm the "squeak" or "squawk" noise in the vehicle as follows:
^
Open the vehicle hood with the engine off
^
Have someone operate the clutch pedal
^
Listen for the noise in the top bushing area
3.
Replace the upper and lower bushings with the bushings identified with the >N66< mark as shown in the "PARTS INFORMATION" in this TSB.
Follow the bushing replacement procedure outlined in the appropriate shop manuals.
NOTE:
All Hyundai parts distribution centers have new bushings in stock.
