Tucson V6-2.7L (2005)
NOTE:
Be careful not to tear the cowl weatherstrip ends where the adhesive attaches them to the fenders.
6.
Remove 3 screws and then remove the cowl top cover from the body panel.
7.
Apply a small bead of sealant into the repair weatherstrip channel (prepared in steps 1 and 2), and install the repair weatherstrip over the sheet
metal water protection panel.
NOTE:
The repair weatherstrip must be installed as shown above.
^
Recommended sealant:
Weatherstrip sealants, such as 3-M Weatherstip Adhesive (08011). Windshield mounting adhesives, such as 3-M Windo-Weld Urethane
(08609) are also acceptable.
