Tucson V6-2.7L (2005)
^
Band type hose clamp (Service part)
6.
Reinstall the air flow sensor between the "A" and "B" air intake hoses.
NOTE:
Make sure that the air flow sensor connector direction is as shown.
7.
Securely connect the "A" and "B" air intake hoses to the air flow sensor and tighten the clamps to specification.
^
Clamp torque specification : 0.4 - 0.5
kgf-m (35 lbf.-in. - 44 lbf.-in.)