Tucson AWD L4-2.0L (2007)
5) Press "YES" to operate motor pump and solenoid valve.
6) Wait 60 seconds before operating the air bleeding. (If not, you may damage the motor.)
5. Pump the brake pedal several times, and then loosen the bleeder screw until fluid starts to run out without bubbles. Then close the bleeder screw.
6. Repeat step 5 until there are no more bubbles in the fluid for each wheel.
7. Tighten the bleeder screw.
Bleed screw tightening torque: 7 - 13 Nm (70 - 130 kg-cm, 5.1 - 9.5 ft. lbs.)
