Tucson AWD L4-2.0L (2007)
2. Remove water inlet (A), gasket and thermostat.
INSPECTION
1. Immerse the thermostat in water and gradually heat the water.
2. Check the valve opening temperature.
Valve opening temperature: 82°C (177°F)
Full opening temperature: 95°C (205°F)
If the valve opening temperature is not as specified, replace the thermostat.
3. Check the valve lift.
Valve lift: 8 mm (0.3 inch) or more at 95°C (205°F)
If the valve lift is not as specified, replace the thermostat.
INSTALLATION
1. Place thermostat in thermostat housing.
1) Install the thermostat with the jiggle valve upward.
2) Install a new gasket(A) to the thermostat(B).
