Tucson AWD L4-2.0L (2007)
Compass: Adjustments
COMPASS MIRROR
ADJUSTMENT
CALIBRATION PROCEDURE
If the display read "C", calibrate the compass.
1. Driving the vehicle in a circle at less than 8 km/h 3 times or until the compass heading appears.
2. Driving in a circle in right-handed direction and opposite direction are possible, and if the calibration is completed, the compass heading will
appear.
3. Keep driving in a circle until a compass heading appears.
TO ADJUST THE ZONE SETTING:
1. Determine the desired Zone Number based upon your current location on the Zone Maps above.
2. Press and hold the Feature Control button(A) for more than 6 but less than 9 seconds, the current Zone Number will appear on the display(B).
3. Pressing and holding the Feature Control button(A) again will cause the numbers to increment (NOTE: they will repeat "'13, 14, 15, 1,2,..).
Releasing the button when the desired Zone Number appears on the display will set the new Zone.
4. Within about 5 seconds the compass will start displaying a compass heading again.
There are some conditions that can cause changes to the vehicle magnets. Items such as installing a ski rack or a CB antenna or even some body repair
work on the vehicle can cause changes to the vehicle's magnetic field. In these situations, the compass will need to be re-calibrated to quickly correct for
these changes.
TO RE-CALIBRATE THE COMPASS:
1. Press and hold the Feature Control button(A) for more than 9 seconds. When the compass memory is cleared, a "C" will appear in the display(B).
2. To calibrate the compass, drive the vehicle is 2 complete circles at less than 5 MPH.
