Tucson AWD L4-2.0L (2007)
Driver/Vehicle Information Display: Service and Repair
TRIP COMPUTER
REPLACEMENT
NOTE:
-
When prying with a screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
-
Take care not to scratch the crash pad and related parts.
1. Tilt the steering column down.
2. Remove the screws, and detach the clips.
3. After disconnecting the trip computer switch connector (A), remove the cluster facia panel (B).
4. Installation is the reverse or removal.
NOTE:
-
Make sure the connector is plugged in properly.
-
Replace any damage clips.
