Tucson AWD L4-2.0L (2007)
Fuel Pressure Regulator: Service and Repair
FUEL PUMP (FP)
REMOVAL (INCLUDING FUEL FILTER AND FUEL PRESSURE REGULATOR)
1. Turn ignition switch to "OFF" and disconnect the battery negative (-) terminal.
2. Remove the rear seat cushion flame hinge bolts, and then lift the cushion.
3. Remove the service cover (A) under the carpet.
4. Disconnect the fuel pump wiring connector (A).
5. Remove the fuel feed hose (B) and suction hose (C).
6. Remove the fuel pump plate mounting bolts (D).
7. Remove the fuel pump assembly.
INSTALLATION
1. Install the fuel pump according to the reverse order of "REMOVAL" procedure.