Tucson AWD L4-2.0L (2007)
Brake Light Switch: Adjustments
BRAKE PEDAL BRAKE SWITCH ADJUSTMENT
PEDAL HEIGHT
1. Disconnect the brake switch connector, loosen the brake switch locknut (A), and bake off the brake switch (B) until it is no longer touching the
brake pedal.
2. Life up the carpet. At the insulator cutout, measure the pedal height (c) from the middle of the left-side center of the pedal pad (D).
Standard pedal height (with carpet removed): 163 mm (6.41 inch)
3. Loosen the pushrod locknut (A), and screw the pushrod in or out with pliers until the standard pedal height from the floor is reached. After
adjustment, tighten the locknut firmly Do not adjust the pedal height with the pushrod depressed.
BRAKE SWITCH CLEARANCE
