Tucson AWD L4-2.0L (2007)
Tire Pressure Sensor: Removal and Replacement
Removal
TPMS SENSOR
REMOVAL
TIRE REMOVAL
1. Deflate tire remove balance weights.
CAUTION: The tire bead should be broken approximately 180° from the valve side of the wheel. The bead breaker should not be set too deep.
Avoid tire/tool contact with the valve on dismount. Dismount should end near the valve.
SENSOR REMOVAL
CAUTION: Handle the sensor with care.
1. Remove the valve nut.
CAUTION: The valve nut should not be re-used.
2. Discard the valve assembly.
