Tucson AWD L4-2.0L (2007)
CAUTION:
^
Be careful not to disassemble the rear hub assembly. (For vehicles equipped with ABS.)
^
Care must be taken not to scratch or damage the teeth of the rotor.
^
The rotor must never be dropped.
^
If the teeth of the rotor are chipped, it results in deformation of the rotor. It will make It impossible to detect the wheel rotation speed
accurately and to operate the system normally.
9. Loosen the rear dust cover mounting bolts (A) and then remove the rear parking brake assembly (B).
10. Remove the rear axle carrier (A).
a. Remove the trailing arm mounting bolt (B).
b. Remove the suspension arm mounting nut (C).
c. Remove the strut mounting nuts (D).
INSPECTION
1. Check the hub bearing for wear or damage.
2. Check the rotor for chipped teeth.
