Tucson AWD L4-2.0L (2007)
INSPECTION
1. Check the stabilizer bar for deterioration and damage.
2. Check all bolts for damage and deformation.
3. Check the stabilizer link dust cover for cracks or damage.
Installation
FRONT STABILIZER BAR
INSTALLATION
1. Install the bushing (B) on the stabilizer bar (A).
NOTE: Bring clamp (c) of stabilizer bar (A) into contact with bushing (B).
2. Install the bracket on the bushing (B).
3. After tightening the bolts of the bushing bracket temporarily, install the bushing bracket on the opposite side.
Tightening torque 50 - 65 Nm (500 - 650 kgf-cm, 36.9 - 48.0 ft. lbs.)
4. Install the rear mounting bolts of sub-frame.
5. Install the nut (B) on the stabilizer bar link (A).
Tightening torque 100 - 120 Nm (1000 - 1200 kgf-cm, 73.8 - 88.5 ft. lbs.)