Tucson AWD L4-2.0L (2007)
c. Disconnect the ball joint (C) from knuckle (D) using the special tool (09568-34000).
CAUTION: Apply a few drops of oil to the special tool. (Boot contact part)
7. Remove the lower arm ball joint mounting bolts (A).
8. Remove the strut lower arm mounting bolts (A).
9. Remove the hub and the knuckle assembly (B).
CAUTION: Be careful not to damage the boot and rotor teeth.
INSPECTION
1. Check the hub for cracks and the splines for wear.
2. Check the brake disc for scoring and damage.
3. Check the knuckle for cracks.
4. Check the bearing for cracks or damage.
