Tucson AWD L4-2.4L (2010)
Rear Door Exterior Handle: Service and Repair
Replacement
Outside Handle Replacement
1. Disconnect cap, loosen the mounting bolt.
2. Remove the handle cover (A).
Tightening torque :
6.9 - 10.8 N.m (0.7 - 1.1kgf.m, 5.1 - 8.0 lb-ft )
3. Remove the outside handle (A), by sliding it rearward.
4. Installation is the reverse of removal.
NOTE:
-
Roll the glass up and down to see if it move freely without binding.
-
Make sure the door locks/unlocks and opens/closes properly.