Tucson AWD L4-2.4L (2010)
3. Installation is the reverse of removal.
NOTE:
-
Make sure the connector is plugged in properly.
Room Lamp Replacement
1. Using a screwdriver, remove the cover (A).
2. After loosening the mounting screws, then remove the room lamp (B).
3. Disconnect the connector (C).
4. Installation is the reverse of removal.
NOTE:
-
Make sure the connector is plugged in properly.
Vanity Lamp Replacement
1. Using a screwdriver, remove the vanity lamp (A).
2. Disconnect the connector (B).
3. Installation is the reverse of removal.
Roof Trim Assembly Replacement