Tucson AWD L4-2.4L (2010)
3. Pack adhesive into the cartridge without air pockets to ensure continuous delivery. Put the cartridge in a caulking gun, and run a bead of sealant
(B) around the edge of the panoramaroof frame as shown. Apply the adhesive within 30 minutes after applying the glass primer. Make a slightly
thicker bead at each corner.
4. Insert the SST (09816-2S100) (B) between the fixed glass and each panel side to install the fixed glass (A) as shown below picture.
5. Check the Clearance and gap for each side after installing the panoramaroof.