Tucson AWD L4-2.4L (2010)
Spoiler: Service and Repair
Replacement
Rear Spoiler Replacement
NOTE:
-
When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged.
-
Put on gloves to protect your hands.
-
Take care not to scratch the body surface.
1. Remove the tailgate trim.
2. After loosening the mounting nuts, then remove the rear spoiler (A)
3. Disconnect the connector (A) and washer nozzle (B).
4. Installation is the reverse of removal.
NOTE:
-
Replace any damage clips