Tucson AWD L4-2.4L (2010)
3. Remove the front brake disc by loosening the screws (A).
Installation
1. Installation is the reverse of removal.
2. Use a SST (09581-11000) when installing the brake caliper assembly.
3. After installation, bleed the brake system.
Replacement
Replacement
Front brake pads
1. Remove the brake hose mounting bracket bolt (A).
2. Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way.
Tightening torque:
21.6 - 31.4 N.m (2.2 - 3.2 kgf.m, 15.9 - 23.1 lb-ft)
