Tucson AWD L4-2.4L (2010)
Brake Caliper: Service and Repair
Rear Disc Brake
Components and Components Location
Components
Removal and Installation
Removal
1. Remove the rear wheel & tire.
Tightening torque:
88.3 - 107.9 N.m(9.0 - 11.0 kgf.m, 65.1 - 79.6 lb-ft)
2. Remove the rear shock absorber. [2WD Only]
3. Remove the rear upper arm. [2WD Only]
4. Loosen the hose eyebolt (B) and caliper mounting bolts (C), then remove the rear caliper assembly (A).
Tightening torque:
Brake hose to caliper(B):
24.5 - 29.4 N.m (2.5 - 3.0 kgf.m, 18.1 - 21.7 lb-ft)
Caliper assembly to carrier(C):
78.5 - 98.1 N.m (8.0 - 10.0 kgf.m, 57.9 - 72.3 lb-ft)