Tucson AWD L4-2.4L (2010)
10. Remove the compressor bracket (A).
11. Remove the idler (A) and drive belt tensioner pulley (B).
CAUTION:
The tensioner pulley bolt has LEFT handed threads.
12. Remove the water pump pulley (A), crankshaft pulley (B).
NOTE:
Use the SST(Ring gear stopper, 09231-2B100) to remove the crankshaft pulley bolt, after remove the starter
13. Remove the oil pan (A).
CAUTION:
Use the SST (Oil pan remover, 09215-3C000) be careful not to damage the contact surfaces of cylinder block and oil pan.