Tucson AWD L4-2.4L (2010)
How to Reset and Relearn ETC Adaptive Value:
NOTE:
If the engine is started without waiting at least 5 seconds after turning the ignition key ON to allow the ECM to automatically learn the throttle valve
position, MIL illumination may occur with DTC P0638 and P2110. In this case, follow the above procedure again.
NOTE:
If equipped with the PUSH BUTTON ENGINE START SYSTEM, push the engine start button 2 times WITHOUT DEPRESSING THE BRAKE
PEDAL to allow the ECM to automatically learn the throttle valve position, and then wait for at least 5 seconds.
GDS steps to Reset Adaptives Values of the ECU:
1. Select Option Treatment at GDS main menu:
2. GDS should automatically determine VIN, then enter Engine Control System.
