Tucson AWD L4-2.4L (2010)
2. Buzzer sound
(1) Buzzer sound specification
(2) Buzzer output to estimate BCM INT Buzzer in cluster, and data transmission.
3. Seat belt reminder (Driver seat)
(1) From IGN1 switch ON, Warning lamp for 1sec(DUTY 50%) and Chime buzzer for 6 time every 1sec. (in case of S/BELT unfastened state)
But, within 6sec in the S/BELT fastened, the Chime buzzer output is stop, and Warning lamp is the remaining time.
(2) Lamp and Chime buzzer become output stop when IGN1 is turned OFF within 6sec-output.
(3) If vehicle speed over 10Km/h, Warning lamp and Chime buzzer are work for 1time when Seat belt unfastened after IGN ON.
(4) If vehicle speed below 5Km/h or IGN OFF or seat belt fastened, pattern is stop when pattern is running.
(5) Seat belt fastened->unfastened when IGN1=ON state : if vehicle speed over 10Km/h,1time output. And if vehicle speed 5 - 10Km/h, Warning
lamp for 1s(DUTY 50%) and Chime buzzer for 6 every 1s. If vehicle speed less than 5Km/h, Warning lamp for 6 every 1s(DUTY 50%)
4. Seat belt reminder (Assist seat)
