Tucson AWD L4-2.4L (2010)
28. Apply Permatex Ultra Gray Sealer or Hyundai Ultra Gray Gasket Sealer, P/N 00232-19039, to the valve body cover.
29. Reinstall the valve body cover and bolts. Tighten the bolts to specification.
Torque: 7.2~8.7 lb-ft (1.0~1.2 kgf.m)
30. Add ethylene glycol engine coolant to the radiator and check the level according to the appropriate shop manual, "Engine" Section.
31. Add approximately five quarts of Hyundai SPH-IV ATF Check the level with the engine idling in Park and the ATF at normal operating
temperature (122~140°F 50~60°C) according to TSB 10-AT-001.
32. Clear the codes and test drive the vehicle for two driving cycles (two key-on to key-off driving cycles, including 1-2-3-4-5 upshifts and 5-4-3-2-1
downshifts). If the DTCs return, perform the following repairs:
WARRANTY INFORMATION:
