Tucson AWD L4-2.4L (2010)
NOTE:
Release the connector lock (A) as indicated by the arrow, and then push-down the lock.
Make sure the connector is locked completely when installing.
Interior 2 Antenna
1. Disconnect the negative (-) battery terminal.
2. Remove the floor console rear panel (A) using the appropriate tool.
NOTE:
Take care not to damage and scratch the floor console rear panel and its related parts.
Take care not to damage the hook when removing the floor console rear panel.
3. After loosening the antenna nuts (2EA) and connector, remove the interior 2 antenna (A).
NOTE:
Release the connector lock (A) as indicated by the arrow, and then push-down the lock.
Make sure the connector is locked completely when installing.
Interior 3 Antenna
