Tucson AWD L4-2.4L (2010)
Repair Procedures
Removal
Smart Key Unit
1. Disconnect the negative (-) battery terminal.
2. Remove the glove box housing.
3. After disconnecting the smart key unit connector (A), loosen the smart key unit mounting bolts, and remove the smart key unit (B).
RF Receiver
1. Disconnect the negative (-) battery terminal.
2. Remove the glove box housing.
3. Remove the air vent housing in front of the assist seat.
4. After loosening the mounting nut (B), disconnect the connector (A) and remove the receiver (C).
Interior 1 Antenna
1. Disconnect the negative (-) battery terminal.
2. Remove the seat heater switch assembly.
3. After loosening the antenna nuts (2EA) and connector (B), remove the interior 1 antenna (A).
