Tucson AWD L4-2.4L (2010)
Starter Motor: Removal and Replacement
Components and Components Location
Component
Repair Procedures
Removal and Installation
Starter
1. Disconnect the battery negative cable.
Tightening torque:
(-) terminal : 4.0 - 6.0N.m (0.4 - 0.6kgf.m, 3.0 - 4.4lb-ft)
2. Disconnect the starter cable (A) from the B terminal (B) on the solenoid (C), then disconnect the connector (D) from the S terminal (E).