Tucson AWD L4-2.4L (2010)
6. Installation is the reverse of removal.
Rear
Replacement
1. Remove the rear wheel & tire.the rear wheel & tire.
Tightening torque :
88.3 - 107.9N.m(9.0 - 11.0Kgf.m, 65.1 - 79.6lb-ft)
CAUTION:
Be careful not to damage to the hub bolts when removing the front wheel & tire.
2. Loosen the bolt & nut and then disconnect the shock absorber(A) with the rear axle.
Tightening torque :
137.3 - 156.9N.m(14.0 - 16.0Kgf.m, 101.3 - 115.7lb-ft)
3. Loosen the shock absorber mounting bolts(A).
Tightening torque :
49.0 - 63.7N.m(5.0 - 6.5Kgf.m, 36.2 - 47.0lb-ft)
4. Installation is the reverse of removal.
Front
Components
