Tucson AWD L4-2.4L (2010)
Suspension Strut / Shock Absorber: Overhaul
Disassembly
Disassembly
1. Remove the dust cover(A).
2. Using the special tool (09546-26000), compress the coil spring (A).
3. Remove the self-locking nut (C) from the strut assembly(B).
4. Remove the insulator, spring seat, coil spring and dust cover from the strut assembly.
5. Reassembly is the reverse of the disassembly.
Inspection
Inspection
1. Check the strut bearing for wear and damage.
2. Check the spring upper and lower seat for damage and deterioration.
3. Compress and extend the piston rod (A) and check that there is no abnormal resistance or unusual sound during operation.
Disposal
Disposal
1. Fully extend the piston rod.
2. Drill a hole on the A section to remove gas from the cylinder.