hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

A/T - MIL ON/DTC's P0717/P0721/P0722/Stays In 3rd gear|Page 4554 > < A/T - MIL ON/DTC's P0717/P0721/P0722/Stays In 3rd gear|Page 4548
Page 1
background image

Transmission Speed Sensor: All Technical Service Bulletins
A/T - MIL ON/DTC's P0717/P0721/P0722/Stays In 3rd gear

Group: TRANSAXLE

Number: 11-AT-002

Date: JANUARY 2011

Model: 2010 TUCSON, 2010 SANTA FE, 2011 SONATA, 2011 ELANTRA

Subject
ATA INPUT AND OUTPUT SPEED SENSOR
DTC P0717, P0721 & P0722

This bulletin supersedes TSB 10-AT-005 to add 2011 Elantra and 2011 Sonata Turbo.

DESCRIPTION:

Incorrect operation of the input and output speed sensors may result in the following symptoms:

^

Check Engine Light illuminated

^

Transaxle held in 3rd gear Fail-Safe

^

Diagnostic Trouble Codes P0717, P0721 or P0722

NOTE:

Do NOT replace the transaxle for input and output speed sensor codes listed above. Instead, follow the repair procedure shown.

APPLICABLE VEHICLES:

PARTS INFORMATION:

REPAIR PROCEDURE:

1. Using a GDS, check for DIG in "Automatic Transaxle" menu. Record the DTC and description.

2. From the GDS, select the following parameters. Drive the vehicle and monitor the sensors.

^

Vehicle and A/T menu

^

"Current Data"

A/T - MIL ON/DTC's P0717/P0721/P0722/Stays In 3rd gear|Page 4554 > < A/T - MIL ON/DTC's P0717/P0721/P0722/Stays In 3rd gear|Page 4548