Tucson AWD L4-2.4L (2010)
^ If the sensor shows:
^
Changing output while driving from a cold start, the wiring currently has no open/short circuits. Go to Step 4.
^
No output or unchanging output while driving from a cold start, go to Step 3.
3. Check the wiring harness between the TCM and transaxle visually for a damaged wire or a short circuit to ground. If so, repair or replace the harness,
P/N 914xx-xxxxx
4. Refer to the DTC recorded in Step 1 and follow the repair procedure shown above.
5. Disconnect the battery.
6. Remove the under cover under the transmission.
7. Drain the radiator. Remove the lower radiator hose from the radiator.
8. Drain the ATF.
9. Remove the bolts that secure the valve body cover and remove the cover.
CAUTION:
