Tucson AWD L4-2.4L (2010)
16. Remove the valve body bolts in the order shown and remove the valve body.
17. Use a screwdriver to depress the locking tab and pull downward on the connector to the input and output speed sensor.
18. Remove two bolts that secure the valve body harness to the case.
19. Pull the connector downward out of the case.
20. Install a new valve body harness in the reverse order of assembly and tighten the bolts to specification.
Torque: 7.2~8.7 lb-ft (1.0~1 .2 kgf.m)
