Tucson AWD L4-2.4L (2010)
5. Tighten the clutch cover.
Install the clutch cover assembly to the flywheel and temporarily tighten the bolts three steps at time in a star pattern.
Tightening torque :
24.5 - 34.3 N.m (2.5 - 3.6 kgf.m, 18.0 - 26.0 lb-ft) (2.4L-6EA)
CAUTION:
When installing the clutch cover, tighten the bolts in diagonal directions not to be bent or twisted.
* Possible problems when not following
-
When tightening the bolt completely at a time: the clutch cover can be twisted and vibration can occur.
-
On vehicles with 2.4L gasoline engines and clutches, it is necessary to follow this caution.
-
Not following tightening torque: There can be bad torque transmission in clutch and relaxation possibility of bolts.