Tucson FWD L4-2.0L (2007)
4. After removing the hogring clips (A) on the front of seat back and remove the seat back cover (B).
CAUTION: When removing the hogring clip, remove the hogring clip while pressing the wire so as not to separate the wire so as from
the sponge.
5. Installation is the reverse of removal.
NOTE:
-
Be sure to perform PODS re-zero with Hi-Scan (pro) after replacing parts (passenger's)
-
To prevent wrinkles, make sure the material is stretched evenly over the cover (A) before securing the hogring clips (B).
-
Replace the hogring clips with new ones using special tool (C).