Tucson FWD L4-2.0L (2007)
Wheel Speed Sensor: Testing and Inspection
ANTI-LOCK BRAKING SYSTEM WHEEL SPEED SENSOR
INSPECTION
1. Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
CAUTION: Must use the resistance (100 Ohms), as shown, in order to protect the active wheel speed sensor, before measuring the output
voltage.
2. Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as shown.
^
V: 590 mVolts - 840 mVolts
^
V: 1.18 Volts - 1.68 Volts
^
Frequency range: 1 - 2,000 Hz
