Tucson FWD L4-2.0L (2007)
Tightening torque 50 - 65 Nm (500 - 650 kgf-cm, 36.9 - 48.0 ft. lbs.)
4. Install the stabilizer bar link mounting nut (A).
Tightening torque 100 - 120 Nm (1000 - 1200 kgf-cm, 73.8 - 88.5 ft. lbs.)
5. Employ the same manner described above step 3 and 4 to the other side.
6. Install the rear wheel and tire (A) on the rear hub (B).
Tightening torque 90 - 110 Nm (900 - 1100 kgf-cm, 66.4 - 81.2 1 ft. lbs.)
CAUTION: Be careful not to damage the hub bolts (c) when installing the rear wheel and tire (A).
