Tucson FWD L4-2.0L (2007)
COMPONENTS
DISASSEMBLY
DRIVESHAFT (RH)
CAUTION:
^
Do not disassemble the BJ assembly.
^
Special grease must be applied to the driveshaft joint Do not substitute with another type of grease.
^
The boot band should be replaced with a new one.
1. Remove the DOJ. boot bands and pull the DOJ. boot from the DOJ. outer race.
a. Using a plier or flat-tipped (-) screwdriver, remove the LH boot band and LH DOJ. boot band from the driveshaft
b. Remove RH boot band and RH DOJ. boot band in the same way of LH removal procedure.
CAUTION: Be careful not to damage the boot.