Tucson FWD L4-2.4L (2011)
PARTS RECOMMENDED
SERVICE PROCEDURE RECOMMENDATIONS:
BRAKE ROTOR RESURFACING
NOTE:
Always follow the brake lathe manufacturer's recommendations for proper machining.
NOTE:
It is recommended to use an "on-car" brake lathe.
NOTE:
For more information on brake disc service, refer to the applicable vehicle shop manual.
^ When measuring the brake disc for minimum service thickness and run-out, be sure to remove all surface contamination and corrosion. This will
ensure an accurate measurement.
^ Measure the disc thickness at 8 points (every 45 degrees). Measure at the same distance (~5mm/0.2") inboard of the outer edge of the disc. Record
