Tucson FWD L4-2.4L (2011)
16. Remove 8 bolts in the order shown and remove the valve body.
17. Use a screwdriver to depress the locking tab and pull outward on the connector to the input and output speed sensor.
18. Remove two bolts that secure the valve body harness to the case.
19. Pull the connector downward out of the case.
20. Install a new harness and insert the connector into the case.
21. Attach the retainer and bolt that secures the connector in the case. Install the bolts.
Torque: 6.7 lb.ft (0.9~1 .0 kgf.m)
