Tucson FWD L4-2.4L (2011)
AFT TEMPERATURE = 122-140°F (50-60°C) SHIFT LEVER IN "P" AND ENGINE RUNNING (HEV IN "EV READY" MODE)
8. If no oil flow occurs, add SPH-IV ATF through the oil level hole until oil flows out in a thin oil stream.
NOTE:
Use a suction gun or equivalent to add ATF. A suction gun is available from:
^ Snap-On Tools - YA745A
^ MAC TOOLs - GS19HD
9. Reinstall the overflow plug and torque to specification.
Steel pan: Torque: 25-32 lb-ft (3.5-4.5 kgf.m)
Plastic pan: Turn plug past detent.
ALTERNATE ATF FILL PROCEDURE: