Tucson FWD L4-2.4L (2011)
27. Install the valve body bolts and torque to specification in the order shown.
Torque: 6~7 lb.ft (0.9~1.0 kgf.m)
28. Reconnect the solenoid harness to the solenoids and oil temperature sensor.
29. Install the bolts to the solenoid harness connector and torque to specification.
Torque: 7.2~8.7 lb-ft (1.0~1.2 kgf.m)
30. Apply Permatex Ultra Gray Sealer or Hyundai Ultra Gray Gasket Sealer, P/N 00232-19039, to the valve body cover and reinstall the cover. Tighten
the bolts to specification.
Torque: 7.2~8.7 lb-ft (1.0~1.2 kgf.m)
31. Reinstall the lower radiator hose and add ethylene glycol engine coolant to the radiator and check the level according to the appropriate shop
manual, "Engine Section.
