Tucson FWD V6-2.7L (2009)
7. Remove the clamp of the return tube and hose. (when removing return tube and hose)
8. Remove the return tube and hose. (when removing return hose)
9. Disconnect the pressure hose (A) connector from the oil pump. (when removing the pressure hose)
10. Disconnect the pressure hose assembly. (when removing the pressure hose)
11. Remove the color tube mounting clip bolt. (when removing the color tube)
12. Disconnect then remove the color tube from the power steering oil reservoir tank side hose. (when working on the color tube)
Installation
1. Support the specified portion of the vehicle with a lift.
2. Insert the color tube from the front pump upper part to the lower part and install mounting bolts. (when installing the color tube)
3. Connect the color tube to the power steering oil reservoir tank side hose, return tube and hose side and fix it with clips. (when installing the color
tube)
4. Place the pressure hose and tube assembly in position and connect it to the oil pump. (when installing the pressure hose and tube)
