Tucson FWD V6-2.7L (2009)
Relay Box: Testing and Inspection
Relay Box (Engine Compartment)
Inspection
Power Relay Test (Type A)
1. There should be continuity between the No.1 and No.2 terminals when power and ground are connected to the No.4 and No.3 terminals.
2. There should be no continuity between the No.1 and No.2 terminals when power is disconnected.
Power Relay Test (Type B)
1. There should be continuity between the No.1 and No.2 terminals when power and ground are connected to the No.5 and No.3 terminals.
2. There should be continuity between the No.1 and No.4 terminals when power is disconnected.
Power Relay Test (Type C)
1. There should be continuity between the No.1 and No.4 terminals when power and ground are connected to the No.3 and No.2 terminals.
2. There should be no continuity between the No.1 and No.4 terminals when power is disconnected.
