Veracruz AWD V6-3.8L (2007)
7. Install the brake caliper.
8. Install the tire and wheel.
9. If the parking brake shoe or the brake disc are replaced a newly one, perform the brake shoe bed-in procedure.
1) While operating the parking brake pedal for 69 N (7 kgf, 15 lb) effort, drive the vehicle 500 meters (0.31 miles) at the speed of 60 Km/h
(37.3 mph).
2) Repeat the above procedure more than two times.
3) Must be held on at 30% uphill.
CAUTION: After adjusting parking brake, notice following matter;
1. Must be free from troubles when the parking pedal is operated at 981 N (100 kgf, 220 lb),
2. Check that all parts move smoothly.
3. The parking brake indicator lamp must be on after the parking pedal is worked and must be off after the pedal is released.
PARKING BRAKE PEDAL
1. Install the parking brake cable (A).
2. Install the floor carpet.
3. Install the floor console.
4. Install the parking brake pedal and then install the parking brake pedal mounting bolts and nut (D).
