Veracruz AWD V6-3.8L (2007)
NOTE: Be careful of the knock sensor connector.
INSTALLATION
1. Install the oil filter body and new O-rings.
Tightening torque 9.80 - 11.76Nm (1.0 - 1.2kgf.m, 7.23 - 8.68 lb-ft)
NOTE:
^
All rubber gaskets must not be damaged by assembling parts.
^
Be careful of the knock sensor connector.
^
Always use a new O-rings
2. Install the oil filter body cover (B) and a new gasket on the oil filter body
Tightening torque 9.80 - 11.76 Nm (1.0 - 1.2 kgf.m, 7.23 - 8.68 lb-ft)
3. Connect the water vent hose (A)
4. Install the water temperature control assembly (A).
5. Connect the water hoses on the ETC.
6. Connect the oil pressure switch connector.
7. Install the intake manifold (A) and the surge tank.