Veracruz AWD V6-3.8L (2007)
4. Select Upgrade Event #97. TCM T48 UPDATE. Select system and click OK.
5. Enter the appropriate password and click OK.
6. If the results indicate "Voltage is OK", select OK. If not, select CANCEL and charge the vehicle battery.
7. The progress bar will indicate when reprogramming reaches 100%. Wait until the next screen indicates reprogramming is complete.
8. The GDS will confirm that TCU reprogramming is successfully finished. Click OK.
9. Turn the ignition key OFF for 10 seconds and then start the engine to confirm proper operation of the vehicle.
10. Check for any Diagnostic Trouble Codes (DTCs) and erase the DTC (s) present.
