Veracruz AWD V6-3.8L (2007)
3. Temporarily install the suction cover (A) and a new gasket with the 2 bolts.
4. Tighten the 8 bolts in the order shown in the figure.
5. Install the connectors on the 2 speed sensor wires (A) to the solenoid camp.
3. Temporarily install the suction cover (A) and a new gasket with the 2 bolts.
4. Tighten the 8 bolts in the order shown in the figure.
5. Install the connectors on the 2 speed sensor wires (A) to the solenoid camp.