hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Assist Door Module (ADM)|Page 7616 > < Assist Door Module (ADM)|Page 7614
Page 10
background image

The frequency is fixed at 2khz.

(2) 2 warning sounds are necessary for the SMK system in the following cases :

When receiving the "ID out warning" command from SMK ECU via CAN (meaning that ID is found outside the vehicle), the warning sound
(MAGNETIC BUZZER and External BUZZER) starts.
MAGNETIC BUZZER Sound duration : T1 = 5 s

18. PARKING BRAKE BUZZER WARNING

(1) PARKING BRAKE WARNING SOUND

Frequency : 800 Hz
Sound period : T2 = 0.6sec
Sound duration : infinite

(2) Operation

A. In state of IGN1 ON, this warning sound is start when vehicle speed is over 10Km/h and PARK BRAKE switch is ON.
B. This activity is stop if :
-

IGN1 OFF.

-

Vehicle speed is under 10kmh (with filtering as same method with CAN bit 20Kmh)

-

PARK BRAKE switch is OFF

19. IGN KEY HOLE ILLUMINATION

(1) FUNCTION Description

Turn On Condition

30 sec Illumination Condition

Illumination stops condition

T1 : 30 ± 1sec.

Assist Door Module (ADM)|Page 7616 > < Assist Door Module (ADM)|Page 7614