Veracruz FWD V6-3.8L (2009)
Front Door Panel: Service and Repair
Door Trim Replacement
Replacements
Door Trim Replacement
NOTE:
-
Take care not to scratch the door trim and other parts.
-
Put on gloves to protect your hands.
1. Remove the quadrant inner cover (A).
2. Disconnect the connector (B).
3. Remove the inside cover (A).
4. Remove the cap (E).
5. Loosen the door trim (D) mounting screws. Release the clips that hold the door trim, then remove the door trim by pulling it upward. Disconnect
the power window switch connector (A), power mirror connector (B), and door courtesy lamp connector (C).
6. Remove the inside handle cable assembly (A).